Testing Services

2014 SAE World Congress Technical Papers
Delphi presented 38 technical studies, authored by more than 100 Delphi engineers and innovators, at the SAE® World Congress. More
Worldwide Emissions Standards
Stay up to date with ever changing emissions standards with Delphi's 2014-5 guide for Passenger Cars and Light Duty Vehicles.
More

Mexico Technical Center (Juárez)

Delphi Mexico Technical Center Dimensional Measurement Laboratory

The Dimensional Measurement Laboratory at the Delphi Mexico Technical Center (MTC) is a state-of-the-art dimensional inspection facility designed to help engineering teams meet industry certification standards and customer product specification objectives. Delphi's team of highly trained and experienced technicians uses advanced, high-tech equipment to provide accurate and precise data for prototype and production component inspection.

The laboratory is a certified temperature and humidity controlled room. It specializes in services for automotive industry component development, but also offers the flexibility to support a wide range of non-automotive product programs.

Delphi's MTC Dimensional Measurement Laboratory ensures complete confidentiality in all test activities and will provide highly reliable data. Delphi offers the flexibility to meet the requirements of customers around the world. Services are conducted to meet program schedules and cost objectives as well as customer specific documentation for prototype submissions.


Surface and Roughness Measurement System


Optical Comparator

Capabilities

  • Three Coordinate Measuring Machines (CMM)
  • Provide high speed scanning for form and length measurements, curve and freeform measurements, and reverse engineering.  They can accommodate a wide range of component sizes.
      • CMM Unit #1 features Calypso software interface with vast probe head system:
        • Measure volume: X = 1,200 mm; Y = 1,800 mm; Z = 1,000 mm
        • 4th axis measurement using rotary table (e.g. capability for gears)
        • CAD models can be used
        • Reports can be generated with plotted data (i.e. graphs)
      • CMM Unit #2 features Calypso software interface with vast probe head system:
        • Measure volume: X = 1,000 mm; Y = 1,200 mm; Z = 600 mm
        • CAD models can be used
        • Reports can be generated with plotted data (i.e. graphs) 
      • CMM Unit #3 features Usoft software interface with a single point probe head system:
        • Measure volume: X = 400 mm; Y = 600 mm; Z = 300 mm
        • Automatic programs available 
        • Touching points can be measured and electronic and paper reports are available 
  • Three Optical Comparators with Microvision Imaging Capability
    • Two units offer 10x, 20x, and 50x magnification, fiber-optic illumination for surface measurement
    • One visual measurement system with 10x magnification
    • Other unit with 35x and 455x magnification 
  • Surface and Roughness Measurement System
    • Measures surface finish parameters: Ra, Rz, Rt and others
    • Provides detailed graph of surface finish (electronic or paper)
    • Profilometer can measure different areas of components to help determine cutting location
    • Surface map provides detailed surface form information
    • Sensor provides accuracy level of 1 nanometer resolution  
  • Roundness Measurement System
    • Rotary table measures rotation of components and scans parts to provide roundness, cilindricity and straightness data
    • Sensor provides accuracy level of 1 nanometer resolution 
    • Detailed graph of roundness can be generated (electronic or paper)
  • Spring Tension and Compression Tester
    • Force ranges for equipment: 0 to 8.89 N and 44.48 to 222.4 N  (Can also be measured in lbs.)
    • Outside diameter 20 mm, height 26 mm

The Delphi Advantage

The Delphi Mexico Technical Center supports hundreds of customers worldwide in the design, development, testing, and validation of their products. It is certified to the ISO/TS 16949 Standard for Automotive Supplier Quality Management Systems. The MTC is also certified to the ISO 14001 Environmental Management Systems Standard. It is part of Delphi's network of state-of-the-art technical centers around the world.

Delphi is a leading global supplier of a broad range of technologies with manufacturing facilities located in more than 30 countries. Our products are engineered to meet the rigorous standards of the automotive industry, but Delphi technologies are also found in a wide variety of other applications. We leverage our rich heritage and extensive technical knowledge to offer an array of innovative, cost competitive solutions.

Contact Information

Veronica Ortega
Business Development — Labs & Engineering Services
Delphi Mexico Technical Center
Av. Hermanos Escobar # 5756, Co. FOVISSSTE Chamizal
Ciudad Juárez, Chihuahua 32310
Mexico
U.S. Phone: 915.612.7948
Mexico Phone: +52.656.629.7100 Ext.57948
E-mail: veronica.ortega@delphi.com

 
Close

Download