|
|
|
|
|
|
Motorsports
Race Start System
Delphi Race Start System (RSS) MS0152
;)
The Delphi Race Start System (RSS) MS0152 is a wireless means of controlling standing starts. Race officials can activate or abort a race start sequence from a transmitter located in race control. A six position rotary switch located on the transmitter can allow race officials to vary the timing of the race start sequence.
The system consists of the following:
- (1) RSS Transmitter
- (1) RSS Receiver
- (1) Start/Abort Light Module
- (1) Battery Module (not shown)
Benefits
- Changes transmitting/receiving frequency 80 times per second to reduce the possibility of interference from other radios
- RSS hardware and software is very flexible and can be easily adapted to meet the requirements of various applications
Race Start System Receiver
Example of Start/Abort Lights
Typical Applications
The Delphi RSS is used by the Atlantic Championship Series. Delphi can also work with additional motorsports series.
Receiver Key Technical Statistics
| Temperature Rating | 0 to 60°C |
| Microprocessor | 32 bit |
| Memory | 512 kB Flash, 18 kB RAM |
| 8 Analog Inputs | |
| 8 Timer Inputs/Outputs | |
| 8 2.5 Amp Output Drivers | |
| Frequency Range | 902-928 Mhz |
| Radio Type | Frequency hopper |
| Transmitter Output | 1 Watt |
| Receiver Sensitivity | -108 dBm (minimum) |
For more information about Delphi motorsports products, please contact:
Brad Stout, Delphi Senior Manager of Motorsports Marketing and Technical Operations
a.brad.stout@delphi.com
